CELLOVIS 60 M – HPMC, Modified Cellulose Ether

Application: Cellovis 60M is modified grade and it’s multifunctional additive for gypsum, ready-mix-es and dry-mix products. The water retention properties of cellulose additives increase open time and impart workability, lubricity, shrink and crack resistance, void reduction, and adhesion. In dry mix systems, this product can create fast dissolve and easy viscosity for reliable performance.

Using Amount: Usage level depends on application.

CELLOVIS 150 M- HPMC (Hydroxypropyl Methylcellulose)

Application: Cellovis 150 M is modified grade and it’s multifunctional additive for gypsum, readymixes and dry-mix products. The water retention properties of cellulose additives increase open time and impart workability, lubricity, shrink and crack resistance, void reduction, and adhesion. In dry mix systems, this product can create fast dissolve and easy viscosity for reliable performance .

Using Amount: Usage level depends on application.

VINNAPAS 5044 N (ULS) – Dispersible Polymer Powders

VINNAPAS 5044 N (ULS) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water proofing membranes and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS 5044 N (ULS) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS 5043 N- Dispersible Polymer Powders

VINNAPAS 5043 N is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility. VINNAPAS 5043 N is part of our standard range, offering you the best-in-class solutions.

VINNAPAS 8034 H- Dispersible Polymer Powders

VINNAPAS 8034 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders and plasters, Skim Coats. It is based on a flexible terpolymer of vinyl chloride, ethylene and vinyl laurate. VINNAPAS 8034 H belongs to the product class VINNAPAS H which means that it provides a remarkable hydrophobic effect in addition to adhesion.

VINNAPAS 5010 N (GER)- Dispersible Polymer Powders

VINNAPAS 5010 N (GER) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, and trowelling compounds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS 5010 N (GER) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS 8031 H- Dispersible Polymer Powders

VINNAPAS 8031 H is a hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders and plasters, and skim coats. It is based on a flexible terpolymer of vinyl chloride, ethylene and vinyl laurate. VINNAPAS 8031 H belongs to the product class VINNAPAS H which means that it provides a remarkable hydrophobic effect to the hardened mortar, in addition to adhesion and flexibility.

SILRES BS 1310- Silicone Fluid Emulsions

SILRES BS 1310 is a solventfree, water-thinnable emulsion of a polysiloxane modified with functional silicone resin.

SILRES BS 45– Silicone Resin Emulsions

SILRES BS 45 is a water-dilutable solventless emulsion of a silicone resin used as a binder in the production of silicone resin emulsion paints and plasters.

VINNACEL 808– Dispersible Polymer Powders

VINNACEL 808 is a plasticizing dispersible polymer powder based on vinyl acetate and ethylene with an instant plasticizing and stabilizing effect. The product is in the process of being introduced into industrial use (a scale-up product). Therefore, the product data given is subject to change. Always consult WACKER POLYMERS about the product’s availability before using it for industrial purposes.

For more: www.wacker.com

DXPOL R3 – Powder polymer

Product Description: Re-dispersible powder polymer is the powder form of a special emulsion (macromolecular polymers) after spraying and drying. It’s also called dry powder glue. It dissolves in water easily and quickly forms emulsion, the same with the original emulsion. The membrane will form after the moisture is evaporated, this kind of membrane possesses high flexibility, good climate resistance and high adhesive to various substrates.

Application: It can be widely used in building construction, such as exterior wall of heat preservation and isolation, gluing tiles, interface treatment, whitewashing gypsum, sticking gypsum, building interior and exterior wall putty, and decorating mortar etc. It’s nonpoisonous, tasteless, environmentally protective, and convenient for transportation as well.

DXPOL N6 – Powder polymer

Product Description: Re-dispersible powder polymer is the powder form of a special emulsion (macromolecular polymers) after spraying and drying. It’s also called dry powder glue. It dissolves in water easily and quickly forms emulsion, the same with the original emulsion. The membrane will form after the moisture is evaporated, this kind of membrane possesses high flexibility, good climate resistance and high adhesive to various substrates.

Application: It can be widely used in building construction, such as exterior wall of heat preservation and isolation, gluing tiles, interface treatment, whitewashing gypsum, sticking gypsum, building interior and exterior wall putty, and decorating mortar etc. It’s nonpoisonous, tasteless, environmentally protective, and convenient for transportation as well.

IPOX ER 15

In the field of thin-film applications for paints and coatings, completely new types of hybrid systems have become established in recent years. Aliphatic or cycloaliphatic epoxy resins – especially ipox ER 15 – are combined with silicone resins (e.g. SILRES® HP 2000 or Dow Corning® 3055 Resin). The resulting coating systems are ultra high solid, extremely resistant to yellowing and weathering, and are particularly suitable as excellent corrosion protection coatings that meet high optical demands. Due to savings in application, as well as a longer life cycle, they are also extremely cost-efficient.

Application: Epoxy-Siloxane coatings for corrosion protection, High chemical resistant paints, Coatings for civil engineering.
IPOX ER 1042- Bisphenol A/F epoxy resin, monofunctional reactive diluent.

Properties:

• Modified epoxy resin
• Hydrophobic character
• Excellent wetting of fillers and substrate

Application:

• Coatings for civil engineering
• Solvent free coatings
• Embedding resins
• Paints

IPOX ER 1022– Bisphenol A epoxy resin, monofunctional reactive diluent.

Properties:

• Modified epoxy resin
  Hydrophobic character
  Excellent wetting of fillers and substrate

Application:

• Coatings for civil engineering
• Solvent free coatings
• Embedding resins
• Paints

IPOX EH 2042– modified cycloaliphatic amine (no alkylphenols inside).

Properties:

• Hardener for epoxy resins
• Excellent chemical resistance
• Excellent curing
• Good resistance against yellowing
•  
• Application:
• Epoxy mortars and coatings for civil engineering
• Chemical resistant coatings
• Embedding resins

Universal use

IPOX EH 2072–modified cycloaliphatic amine (no alkylphenols inside).

Properties:

• Hardener for epoxy resins
• Excellent chemical resistance
• Excellent resistance against yellowing

Application:

• Pigmented and unpigmented top-coats for
• industrial flooring
• Chemical resistant coatings
• Universal use

IPOX EH 2065– modified cycloaliphatic amines

• • Properties:
  • Hardener for epoxy resins
  • Free of VOC
  • 100% reactive components
  • Low tendency to yellowing

Application:
Universal hardener
Topcoats

IPOX EH 2471W– Polyamine adduct in water

Properties:

• • Hardener for liquid epoxy resins
  • Emulsify liquid epoxy resin
  • Low viscosity
  • Low odour

Application:
Impregnations and paints based on two component epoxy systems
Self-levelling coatings

CLEARPOX

• • Properties:
  • Epoxy system for casting applications
  • Very long application time
  • Low heat development
  • Very low yellowing tendency
  • Alkylphenol-free
  • VOC-free
  • Outstanding air release properties
  • Optimized UV stability

Application:

• Highly transparent casting system for a very high coating thickness in one step
• For artistic and decorative applications
• River table

STAPA HYDROPOR

STAPA HYDROPOR pastes allow for dust-free processing of aluminum pigments and therefore, are a significant contributing factor for safety. STAPA HYDROPOR pastes are aqueous based and consequently do not contain hydrocarbon solvents. In addition, they disperse easily and aid quick processing and short mixing times.

STAPA HYDROPOR N 503/75 Aluminum Paste

STAPA Hydropor are aluminum pastes to produce lightweight concrete (AAC). The pastes are water based und nearly free of hydrocarbon solvents. These pastes are easy to disperse, dustfree and so fast and safe to use. The STAPA Hydropor pastes can adapted to the customer needs by variation of the particle size and the initial delay of the reaction. The STAPA Hydropor N 503/75 is used for medium raw densities in formulations with a lime-cement proportion < 1.

STAPA HYDROPOR N 1003 Aluminum Paste

STAPA Hydropor are aluminum pastes to produce lightweight concrete (AAC). The pastes are water based und nearly free of hydrocarbon solvents. These pastes are easy to disperse, dustfree and so fast and safe to use. The STAPA Hydropor pastes can adapted to the customer needs by variation of the particle size and the initial delay of the reaction. The STAPA Hydropor N 1003 is used for very low raw densities in formulations with a lime-cement proportion < 1.

STAPA HYDROPOR N 903 Aluminum Paste

STAPA Hydropor are aluminum pastes to produce lightweight concrete (AAC). The pastes are water based und nearly free of hydrocarbon solvents. These pastes are easy to disperse, dustfree and so fast and safe to use. The STAPA Hydropor pastes can adapted to the customer needs by variation of the particle size and the initial delay of the reaction. The STAPA Hydropor N 903 is used for low raw densities in formulations with a lime-cement proportion < 1.

For more: https://www.eckart.net/af/en/Brands/STAPA%C2%AE-HYDROPOR/c/cb087

STAPA ALUPOR

STAPA ALUPOR pastes are blowing agent pastes based on diethylenglycol. These anhydrous products distinguish themselves by increased storage life what makes them particularly attractive for use in warmer regions. The product category of the STAPA ALUPOR pastes allows for good water wettability and therefore, they are easy to disperse. The allow for dust-free processing and are consequently a significant contributing factor to safety.

STAPA ALUPOR N 313

STAPA Alupor N are aluminum pastes to produce lightweight concrete (AAC). These pastes are free of water based on diethylenglycol. These products distinguish themselves by increased storage life which makes them particularly attractive for use in warmer regions. the STAPA Alupor pastes allows for good water wettability and therefore they are easy to disperse. They allow for dust-free processing and are consequently a significant contributing factor to safety. The STAPA Alupor N 313 is used for medium to high raw densities in formulations with a lime-cement proportion < 1.

STAPA® ALUPOR N 913

STAPA® Alupor N are aluminum pastes to produce lightweight concrete (AAC). These pastes are free of water based on diethylenglycol. These products distinguish themselves by increased storage life which makes them particularly attractive for use in warmer regions. the STAPA® Alupor pastes allows for good water wettability and therefore they are easy to disperse. They allow for dust-free processing and are consequently a significant contributing factor to safety. The STAPA® Alupor N 913 is used for very low to low raw densities in formulations with a lime-cement proportion < 1.

STAPA® ALUPOR N 513 Aluminum Paste

STAPA® Alupor N are aluminum pastes to produce lightweight concrete (AAC). These pastes are free of water based on diethylenglycol. These products distinguish themselves by increased storage life which makes them particularly attractive for use in warmer regions. the STAPA® Alupor pastes allows for good water wettability and therefore they are easy to disperse. They allow for dust-free processing and are consequently a significant contributing factor to safety. The STAPA® Alupor N 513 is used for low to medium raw densities in formulations with a lime-cement proportion < 1.

For more: https://www.eckart.net/cn/en/STAPA%C2%AE-ALUPOR-N-513-Aluminum-Paste/p/P02038